Two powder hoppers
Select the powder hopper with the switch on the control panel. Switch materials between stages without emptying and refilling a single hopper.
Cold Gas Spray
REYM-102-PRO
Cold spray system with two powder hoppers
Restore and protect metal surfaces with two powder types ready to use. Separate hoppers let you switch materials between stages and spend less time on changeovers.
…incl. 23% VAT
Pressure regulator with gauge and moisture separator not included.
Check the parameters and connection requirements ↓What’s different about the 102-PRO?
An evolution of the REYM-101-PRO for working with two powder types.
Improved powder feeder
The updated feeder delivers a steady powder flow during spraying.
Updated control electronics
Use the rotary controls to adjust heating and powder feed continuously. A green indicator shows that the system is ready; a red indicator signals an emergency stop.
Spray module for nickel powder blends
The more powerful spray module also supports suitably selected nickel powder blends.
Technical data and connection
Check that your workshop has the right power supply and compressed-air equipment.
| Technology | Cold spray / Cold Gas Spray |
|---|---|
| Powder hoppers | 2 |
| Powder materials | Two types of powder; also selected nickel mixtures |
| System weight | 9 kg |
| Power supply | 220–240 V · 50/60 Hz |
| Maximum heater power | 3300 W |
| Working pressure | 6–8 bar (0.6–0.8 MPa) |
| Airflow | 0.45 m³/min (450 l/min) |
| Heater operating temperature | 0–600 °C |
Specifications from the REYM-102-PRO manual. Check the compressor’s delivered airflow at working pressure; receiver size alone does not tell you how much air it can supply.
What can you use REYM-102-PRO for?
The manual covers protective, repair and corrosion-resistant coatings on metal and ceramic substrates. Choose the powder and process settings to suit the component material and the result you need.
Surface preparation and finishing depend on the individual component.
Restoring component surfaces
Build up worn areas and restore the surfaces of metal components.
Wheel surface repair
Selection of material for surface defects and planned finishing.
Protective coatings
Applying layers matched to the material of the part and its operating conditions.
Questions before purchasing
Assistance in selecting powder, connection and order configuration.
Prepare your inquiry →Is powder fed from both tanks simultaneously?
No. The manual describes selecting one hopper with the panel switch. Powder is fed from that hopper; the second hopper makes it easier to change materials between work stages.
How to choose powder for the repaired part?
The manual lists aluminium, zinc, copper and nickel powders. Tell us the substrate material, the type and size of the damage, and the result you need. We’ll help select the powder and spray settings.
Will my compressor be suitable?
The manual specifies 0.45 m³/min at 6–8 bar. Send us the compressor’s delivered airflow at that pressure and details of your air drying and filtration. Tank capacity alone is not enough to check suitability.
What’s included, and how do I check delivery?
The price … includes 23% VAT. The pressure regulator with gauge and moisture separator are not included. Before ordering, confirm the full scope of supply, any accessories, shipping costs and lead time.
Find the right setup for your work
Tell us what component you work on, its material, the powders you plan to use, and your compressor model and specifications. We’ll use these details to recommend a suitable workstation setup.
